Hoover Washing Machine Error Codes
Your washing machine is one of the most important appliances in your home, and an out-of-the-blue error code is no one’s favourite thing to see. An error code is your machine’s way of telling you that something is wrong and it is coming from the fault associated with that particular error code.
Unless you know what the error codes mean, they aren’t going to be helpful at all. Hoover is renowned in households around the world for its high-quality products and affordability. At Bath Domestic Appliances, we want to help you get your Hoover washing machine working so you can get back to your normal routine.
Error 0
Faulty electronic module, which needs connections to main control module checked.
Error 1
Door safety lock error. Check the exterior of the lock for any fault.
Error 2
Hoover washing machine does not fill in the pre-set time allowed. This could be due to the mains water pressure, a kink in the inlet hose, filter, water inlet valve or a wiring fault.
Error 3
Hoover washing machine fails to drain water in the allotted time. This could be due to a blockage along the system somewhere along the journey or due to a sensor malfunction.
Error 4
Multiple cases of anti-flood contacts in pressure switch.
Error 5
Temperature sensor circuit fault or shorted.
Error 6
EEPROM Failure; defective electronic controller.
Error 7
Motor jam detected or door interlock fault.
Error 8
Hoover washing machine motor tacho open circuited or shorted.
Error 9
Short circuit motor on electronic module.
Error 12
Communication fault between electronic control boards and wires.
Error 13
Communication fault between control boards and wires.
Error 14
Error detected with water heating elements.
Error 15
Electronic control module defect.
Error 16
Error detected with water heating elements.
Error 17
No electric signal coming from motor tachometric generator.
Error 18
Control module defective; wrong electrical input frequency.
E02
Defect in inlet valve and issue with the machine filling with water.
E03
Hoover washing machine experiencing an issue with water draining from the drum.
E06
Unbalanced load in the drum. If this occurs, run an empty cycle to test if there is nothing else the matter.
E16
Serious fault detected with water heating element.
There may be some error codes that you, the machine owner will be able to resolve. However, for the majority of error codes, your Hoover washing machine will be required to be seen by a qualified professional, like Bath Domestic Appliances.
At Bath Domestic Appliances, we operate across all of Bath North East Somerset, including all BA postcodes; Bradford on Avon, Corsham, Frome, Melksham, Peasedown St John, Somerset, Trowbridge, Warminster, and across Wiltshire.
We specialise in repairing all major home appliances including cookers, washing machines, dishwashers, fridge freezers and much more. Get in touch with us by calling 01225 461711 and speaking to our friendly team.
